VMI-II series of inverters is designed to fulfill the demands for office automation and computerization, adjust to the space and position of installation, and eliminate the impact of noise they produce. The inverters feature small size, low noise, high st ability and easy operation, and continue the excellent quality and outstanding performance that our products always retain. This series of inverters adopts IGBT power unit, and is equipped with IGBT drive chip and especially designed control circuit. There fore, our inverters will ensure that your precision electric equipment presents the best effects.
- Product features
- Specifications
- Download
VMI-II series of inverters is designed to fulfill the demands for office automation and computerization,adjust to the space and position of installation, and eliminate the impact ofnoise they produce. The inverters feature small size, low noise, high stability and easy operation, and continue the excellent quality and outstanding performance that our products always retain.This series of inverters adopts IGBT power unit, and is equipped with IGBTdrive chip and especially designed control circuit. There fore, our inverterswill ensure that your precision electric equipment presents the best effects.
Single Phase Pure Sine Wave Power Inverter
Model VMI-I**** | 8KW | 10KW | 12KW | 15KW | 20KW | ||||
Input | Rated capacity(W) | 8KW | 10KW | 12KW | 15KW | 20KW | |||
AC Input | Commercial Power range(VAC) | 100/110/120/127/220/230(+25%,-35%) | |||||||
Output | AVR voltage range(VAC) | 100/110/120/127/220/230±10% Auto-sensing) | |||||||
Transfer time | <7MS | ||||||||
Battery | DC Voltage | 96V | 96/192V | 192VDC | |||||
Appearsnce | External Size(mm) D×W×H | 590*470*730 | |||||||
Size(mm) D×W×H | 690*570*850(1piece) | ||||||||
Net weight(kg) | 95 | 110 | 120 | 140 | 170 | ||||
Gross weight(kg) | 105 | 120 | 130 | 150 | 180 | ||||
General Spec | |||||||||
Input | Frequency(Hz) | 45-65 | |||||||
Output | Waveform | Pure Sine Wave Form | |||||||
Frequency | 50Hz/60Hz±0.5% | ||||||||
protection | overload | Input/output over high or low protecting;low battery protecting;surge and pike-currents protecting; overload protecting 100%-120% 30sec; >120% 100ms; >150%, 50ms output short circiut <150ms | |||||||
Battery | TYPE | Sealed, maintenance-free lead acid | |||||||
Recharge current | 8A(Normal)50A(Maximum) | ||||||||
Battery protection | Automatic self-test, discharge protection, over-chargeing protected, smart management system. | ||||||||
Three Phase Pure Sine Wave power inverter 3KW-50KW
Model No. | VMI-II3KW | VMI-II5KW | VMI-II10KW | VMI-II20KW | VMI-II30W A | VMI-II50KW | |||
Rated capacity | 2.4KW | 4KW | 8KW | 16KW | 24KW | 40KW | |||
AC output | Phase number | 3-phase (3W+N+G) | |||||||
Voltage | 360V±1%(stable status), 380V±5%(temporary status) ,415 V±5% | ||||||||
Frequency | 50Hz/60Hz, frequency precision : ±0.05% | ||||||||
Waveform | With AC Sine signals, linear load, THD is less than 3%, non -linear load, THD is less than 5% | ||||||||
Overload capacity | 125% rated current, shut off automatically after 10 minutes 150% rated current, shut off automatically after 1 minute | ||||||||
Power factor | 0.8 lagged | ||||||||
Dynamic voltage instantaneous change range | 0~100% load change, ±5% | ||||||||
Temporary recover time | <20ms | ||||||||
3-phase voltage unbalance | <±3%(unbalanced load), <±1%(balanced load) | ||||||||
DC input voltage | DC48V±20% 96V±20% 192±20%,DC 240±20%, DC360±20%,380V±5% | ||||||||
Noise (1 meter away) | 48~60dB | ||||||||
Cooling pattern | Internal compelled wind -cooling | ||||||||
Protection | When overloaded, inverter will be shut off automatically, overload/short circuit protection | ||||||||
Display | LED | battery/inversion | |||||||
LCD | Output voltage/DC input voltage/frequency/load percent/ date/operation recording/parameters setting/work instruction | ||||||||
Alarm | Battery low voltage | Intermittent sound every second | |||||||
Overload | Continuous sound | ||||||||
Fault | Continuous sound | ||||||||
Environment | Temperature | 0~50 | |||||||
Relative humidity | 30%~90% no dewing | ||||||||
Altitude | <1000m(for each 100m increment, power drops by 1%, maximum 4000 m) | ||||||||
Dimension (mm) | 520* 700* 1100 | 580* 785*1200 | 1000*660*1170 | ||||||
Three Phase Pure Sine Wave power Inverter 60-200KW
Model No. | VMI-II60KW | VMI-II80KW | VMI-II100KW | VMI-II200KW VMI-II30W A VMI-II50KW | |
Rated capacity | 60KW | 80KW | 100KW | 200KW | |
AC output | Phase number | 3-phase (3W+N+G) | |||
Voltage | 360V±1%(stable status), 380V±5%(temporary status) ,415 V±5% | ||||
Frequency | 50Hz/60Hz, frequency precision : ±0.05% | ||||
Waveform | With AC Sine signals, linear load, THD is less than 3%, non -linear load, THD is less than 5% | ||||
Overload capacity | 125% rated current, shut off automatically after 10 minutes 150% rated current, shut off automatically after 1 minute | ||||
Power factor | 1.0 | ||||
Dynamic voltage instantaneous change range | 0~100% load change, ±5% | ||||
Temporary recover time | <20ms | ||||
3-phase voltage unbalance | <±3%(unbalanced load), <±1%(balanced load) | ||||
DC input voltage | DC360±20%,380V±5% | ||||
Noise (1 meter away) | 48~60dB | ||||
Cooling pattern | Internal compelled wind -cooling | ||||
Protection | When overloaded, inverter will be shut off automatically, overload/short circuit protection | ||||
Display | LED | battery/inversion | |||
LCD | Output voltage/DC input voltage/frequency/load percent/ date/operation recording/parameters setting/work instruction | ||||
Alarm | Battery low voltage | Intermittent sound every second | |||
Overload | Continuous sound | ||||
Fault | Continuous sound | ||||
Environment | Temperature | 0~50 | |||
Relative humidity | 30%~90% no dewing | ||||
Altitude | <1000m(for each 100m increment, power drops by 1%, maximum 4000 m) |